REFERENCE ETHERNET FROM QED

This is is a Class I Category 8.1 cable and can support 40G Ethernet. It includes Ferrite insulation, low-loss dielectric and Telegärtner plugs combined to deliver ultra-low jitter The Reference Ethernet uses 99.999% oxygen-free copper twisted-pairs – with a dissimilar twist rate for each pair – to maximise noise-rejection. To reduce insertion loss (i.e. the reduction of signal strength at the end of the cable compared to that at the start) these cables use an aluminium mylar wrap, within a foil wrap, within a ferrite-impregnated jacket, which exceeds the CAT 8 insertion loss standard. This Reference cable also exceeds CAT 8 standard for attenuation-to-crosstalk ratio (i.e. an indicator of the margin by which it avoids introducing any errors into the data stream). Also, any impedance mismatch between the cable and the equipment it’s connected to can cause the signal to be reflected back and forth. The Telegärtner plugs are there to minimise that. Prices:  1M – £149 / €189 / $199 2M – £159 / €199 / $209 3M – £179 / €229 / $229 5M – £199 / €249 / $249 Contact: www.qed.co.uk

The post REFERENCE ETHERNET FROM QED appeared first on The Audiophile Man.

Source link